Understanding Hybrid part numbers - Haydon Switch & Instrument - A Tritex Corporation Company, non-captive shaft, eternal linear motors, various screw lengths

Name:
E-mail:

	Size 14 with Integrated Connector
	New Linear Rail Systems
	New Size 11 Double Stack Captive Hybrid Linear Actuator

UNDERSTANDING HYBRID PART NUMBERS

A standard Haydon motor part number consists of 7 digits to 10 digits – XXXXX-VV-XXX.

·	The first two digits indicate the motor’s series or size (in mm). Example: 35000 Series = 35 mm sq.
·	The third digit or letter indicates the motor’s step angle Example: F = 1.8° non-captive; H = 1.8° captive or external linear; J = .9° non-captive; K = .9° captive or external linear (NOTE: External linear actuators have the prefix “E” to distinguish them from the captive actuators; High Temperature actuators require the prefix “T”)
·	The fourth digit indicates the number of leads. (4 leads for bipolar; 6 leads for unipolar).
·	The fifth digit indicates the travel per step (see chart) Example: N = .00012” (.003048 mm)
·	The sixth and seventh digits indicate the motor’s voltage. Standard voltages are 5 (05) and 12 (12) V. We also have low inductance coils available for chopper drives. Custom voltages are also available.
·	Digits eight, nine, ten indicate captive motor travel
–904 = .354" (9.0) travel...(ONLY SIZE 8) –905 = .500" (12.7) travel –907 = .750" (19.1) travel		–910 = 1.00" (25.4) travel –912 = 1.25" (31.8) travel –915 = 1.50" (38.1) travel	–920 = 2.00" (50.8) travel –925 = 2.50" (63.5) travel –900 = Standard External Linear Motor with grease and flanged nut

SCREW LENGTH OPTIONS: For non-captive shaft and external linear motors various screw lengths are available to accommodate any travel requirement.

Travel Per Step Code Letter or Digit	Linear Travel Per Step		21000 Series Size 8 - 21 mm	28000 Series Size 11 - 28 mm	35000 Series Size 14 - 35 mm		43000 Series Size 17 - 43 mm		57000 Series Size 23 - 57 mm	87000 Series Size 34 - 87 mm
Travel Per Step Code Letter or Digit	Inches	Millimeters	Ø .138" (3.50 mm) screw	Ø .1875" (4.76 mm) screw	Ø .218" (5.54 mm) screw	Ø .250" (6.35 mm) screw	Ø .218" (5.54 mm) screw	Ø .250" (6.35 mm) screw	Ø .375" (9.53 mm) screw	Ø .625" (15.88 mm) screw
U	0.00006	0.0015*	•				•
V	0.000078	0.002						•
AA	0.000098*	0.0025	•
N	0.00012	0.0030*	•		•		•
7	0.000125	0.0031*		•
P	0.00015625	0.0039*				•		•
AB	0.00019*	0.005	•
K	0.00024	0.0060*	•		•		•
9	0.00025	0.0063*		•
A	0.0003125	0.0079*				•		•	•
AC	0.00039*	0.01	•
S	0.0004167	0.0105*							•
J	0.00048	0.0121*	•		•		•
3	0.0005	0.0127		•					•	•
B	0.000625	0.0158*				•		•		•
AD	0.00078*	0.02	•
T	0.0008333	0.0211*							•
Q	0.00096	0.0243*			•		•
1	0.001	0.0254		•					•
C	0.00125	0.0317*				•		•		•
AE	0.00157*	0.04	•
R	0.00192	0.0487*			•		•
2	0.002	0.0508		•					•
Y	0.0025	0.0635								•
Z	0.005	0.127								•